Fiber Optic Sensor System
Remote Fiber Optic Intrusion Detection System
Quintron introduces the FD-34X series Fiber Optic Intrusion Detection System, the next generation in intrusion sensor technology. Built with the same remote intrusion detection capability as the FD-208, the FD-34X series offers features and
communication options never imagined with previous generations of Fiber Defender models.
 

Twice the Power
 Need to protect both a buried zone and a chain link fence? With the FD-342 dual-channel alarm prcessing unit, it’s not a problem. The FD-342 allows independent channel calibration, so users can conect sensor cable from two separate deployments, even if they’re entirely different. Such 2-in-1 operation ensures the FD-342 reduces overall system cost, power, and alarm communication requirements over using two separate alarm processors.

Users can order the FD-342 alarm processors with Fiber Security Network (FSN) compatibility or—for the first time—an IP/XML communication option. The IP/XML option outfits the FD-342 Alarm Processing Unit (APU) with an RJ-45 connector, letting you plug the APU right into your network. Send commands directly to the APU and receive real-time data back, all from the relative comfort of your remote operating station.
With the FSN option, users can plug the APU into the unique opticalcommunication network, raising the allowable distance from one network component (such as an APU) to the next up to 2 kilometers (1.24 miles/6500 feet). The Fiber Security Network also connects up to 127 components or nodes together, creating a versatile network of far-reaching alarm processors and systems.
Twice the Communication
Same Proven Reliability
Even with new electronics and a new Digital Signal Processor (DSP), the FD-34X series continues to provide users with an intrusion detection system that is immune to the effects of EMI, lighting, magnetic fields/radio frequency transmissions, all while filtering out sensor cable signals from non-threatening events such as wind, weather and small animals.

Added to this capability is the incorporation of the FD-34X series’ insensitive lead-in cable. Unaffected by vibration, pressure and offering a maximum allowable length of over 20 km (12.4 miles), these insensitive leads connect the APU to the distant sensor cable, enabling installers to mount the live electronics far away from the protected zone. Effective, capable and far-reaching, the FD-34X series provides first-rate intrusion detection for remote locations with twice the power of previous generations.
 
Features
  • First dual-channel, remote-capable APU (FD-342)
  • Sensor cable immune to EMI, RFI and lighting
  • Detection zones of up to 5 km in length
  • Insensitive lead-in cable length up to 20 km
  • Intelligent signal processing
  • Highly adjustable sensing parameters
  • XML or FSN communication options
Remote Dual-Zone Protection
Through the use of its insensitive lead-in cables, the Model FD-342 offers users the ability to monitor and protect two zones from the same alarm processing unit, both up to 20 kilometers away. Each channel in the FD-342’s dual-channel setup can be calibrated independently, letting you use the same APU to protect both a buried zone and a fence line application. Providing up to 5 kilometers of zone coverage on each channel and the same high level of calibration on each ensures the FD-342 screens out sensor signals from non-threatening events while homing in on those caused by genuine intruders.